CARCARETOOL VEHICLE GUIDE

Austin 10

Austin 10 — saloons:4-door 1932–1935; ''lichfield'' 1934–1937; ''sherborne'' 1936–1937; ''cambridge'' 1937–1947; tourers:2-seat 1933–1939; 4-seat 1933–1939; sports:''ripley'' 1934–1936; cabriolet:''colwyn'' 1933–1937; ''conway'' 1937–1939; van 1933–1947; 2-door pick-up; 2-door roadster utility, 1125|cc|cuin|0|abbr=on 4-cylinder side-valve. Explore engine specifications, fuel economy, dimensions, tire sizes, seating, maintenance and tire-pressure guidance.

Engine1125|cc|cuin|0|abbr=on 4-cylinder side-valve

Transmissiona single plate clutch transmits the drive through a 4-speed manual gearbox with constant mesh gears controlled by a centrally placed speed lever to an open propeller shaft with metal universal joints and then to a spiral bevel driven three quarter floating rear axle

About the Austin 10

Austin 10 is a Saloons:4-door 1932–1935; ''Lichfield'' 1934–1937; ''Sherborne'' 1936–1937; ''Cambridge'' 1937–1947; Tourers:2-seat 1933–1939; 4-seat 1933–1939; Sports:''Ripley'' 1934–1936; Cabriolet:''Colwyn'' 1933–1937; ''Conway'' 1937–1939; Van 1933–1947; 2-door pick-up; 2-door Roadster Utility in the sedan class. The available vehicle data lists 1125 cc 4-cylinder side-valve as an engine configuration, paired with a single plate clutch transmits the drive through a 4-speed manual gearbox with constant mesh gears controlled by a centrally placed speed lever to an open propeller shaft with metal universal joints and then to a spiral bevel driven three quarter floating rear axle. Public source material describes the model in the context of its design, market positioning and vehicle history.

This Austin 10 guide focuses on the details drivers commonly want to know, including engine information for 1125 cc 4-cylinder side-valve and a single plate clutch transmits the drive through a 4-speed manual gearbox with constant mesh gears controlled by a centrally placed speed lever to an open propeller shaft with metal universal joints and then to a spiral bevel driven three quarter floating rear axle transmission information. Exact specifications should be matched to the relevant model year and market.

Austin 10 specifications at a glance

Use this table for the model-level essentials. Exact figures may vary by year, trim, engine and market.

Make	Austin
Model	10
Model years	Not specified
Body style	Saloons:4-door 1932–1935; ''Lichfield'' 1934–1937; ''Sherborne'' 1936–1937; ''Cambridge'' 1937–1947; Tourers:2-seat 1933–1939; 4-seat 1933–1939; Sports:''Ripley'' 1934–1936; Cabriolet:''Colwyn'' 1933–1937; ''Conway'' 1937–1939; Van 1933–1947; 2-door pick-up; 2-door Roadster Utility
Vehicle class	sedan
Manufacturer	Austin
Production	1932–1947290,000 made
Market / country	NL, NZ

Engine, transmission and performance

Engine information for the Austin 10 includes 1125 cc 4-cylinder side-valve.. Published power figures include 21 bhp @ 3,400 rpm; 20 bhp @ 2,600 rpm; Tax rating: 9.996 hp.. Transmission information includes a single plate clutch transmits the drive through a 4-speed manual gearbox with constant mesh gears controlled by a centrally placed speed lever to an open propeller shaft with metal universal joints and then to a spiral bevel driven three quarter floating rear axle.

Engine	1125 cc 4-cylinder side-valve
Fuel type	petrol supplied by pump from a 6 gallons tank at the rear of the car
Transmission	a single plate clutch transmits the drive through a 4-speed manual gearbox with constant mesh gears controlled by a centrally placed speed lever to an open propeller shaft with metal universal joints and then to a spiral bevel driven three quarter floating rear axle
Power	21 bhp @ 3,400 rpm; 20 bhp @ 2,600 rpm; Tax rating: 9.996 hp

Dimensions, weight and practicality

Dimensions and capacity figures are presented as published source data when available.

Wheelbase	7 ft; '''track''' 3 ft
Length	11 ft
Width	4 ft
Height	5 ft
Kerb / curb weight	15+1/2 -Lcwt lb kg 0

Austin 10 performance and economy

Power	21 bhp @ 3,400 rpm; 20 bhp @ 2,600 rpm; Tax rating: 9.996 hp

Austin 10 other specifications

Name	Austin Ten
Image	Austin 104 36125906.jpg
Caption	4-door saloonfirst registered 17 June 1932
Aka	Austin Ten-Four
Sp	uk
Configuration	straight-4
Displacement	1125 cc
Bore	63.5 mm (2.5 in)
Stroke	89 mm (3.5 in)
Block	cast iron, the crankshaft carried on three bearings, the pistons of low expansion aluminium alloy
Head	detachable
Valvetrain	side-valve
Fuelsystem	carburettor supplied by petrol pump, induction and exhaust manifolds cast in one piece to provide a hot spot. ignition by coil and battery
Fueltype	petrol supplied by pump from a 6 gallons tank at the rear of the car
Oilsystem	by gearwheel pump forced to crankshaft, camshaft and big end bearings
Coolingsystem	fan and thermosyphon, automatic thermostat

TIRE PRESSURE

Recommended tire pressure for Austin 10

Check the vehicle placard or owner’s manual for the manufacturer’s cold inflation pressure. CarCareTool estimates are clearly labelled when an exact verified value is unavailable.

Normal load32 PSI front30 PSI rear

Fully loaded34 PSI front33 PSI rear

Load condition	Front	Rear	Status
Normal	32 PSI	30 PSI	Estimate
Fully loaded	34 PSI	33 PSI	Estimate

Calculate how much air to add

Frequently asked questions about Austin 10

These FAQs are generated automatically for this specific vehicle from the specifications, features and ownership data available in CarCareTool. Questions are selected by relevance so the page focuses on details that can actually be answered for this model.

What engine does the Austin 10 have?

The available source data lists the Austin 10 engine as 1125 cc 4-cylinder side-valve. Engine availability can differ by model year and market.

What tire pressure should I use for the Austin 10?

For the correct setting, use the cold inflation pressure on the vehicle placard or in the owner’s manual. When CarCareTool does not have a verified configuration-specific value, its starting estimate is 32 PSI front and 30 PSI rear for normal load. This is an estimate, not an OEM recommendation.

What is the best engine oil for the Austin 10?

There is no single best engine oil for every Austin 10 configuration. Use the viscosity grade and manufacturer approval specified for the exact engine in the owner’s manual.

What body style is the Austin 10?

The Austin 10 is classified as a Saloons:4-door 1932–1935; ''Lichfield'' 1934–1937; ''Sherborne'' 1936–1937; ''Cambridge'' 1937–1947; Tourers:2-seat 1933–1939; 4-seat 1933–1939; Sports:''Ripley'' 1934–1936; Cabriolet:''Colwyn'' 1933–1937; ''Conway'' 1937–1939; Van 1933–1947; 2-door pick-up; 2-door Roadster Utility.

What fuel does the Austin 10 use?

The available source data lists the Austin 10 fuel type as petrol supplied by pump from a 6 gallons tank at the rear of the car.

How much horsepower does the Austin 10 have?

The published figure for the Austin 10 is 21 bhp @ 3,400 rpm; 20 bhp @ 2,600 rpm; Tax rating: 9.996 hp. Output can vary by engine and specification.

What are the dimensions of the Austin 10?

The available source data lists length 11 ft, width 4 ft, height 5 ft, and wheelbase 7 ft; '''track''' 3 ft.

What transmission does the Austin 10 have?

The available source data lists a single plate clutch transmits the drive through a 4-speed manual gearbox with constant mesh gears controlled by a centrally placed speed lever to an open propeller shaft with metal universal joints and then to a spiral bevel driven three quarter floating rear axle transmission options for the Austin 10.

Who makes the Austin 10?

The manufacturer listed for the Austin 10 is Austin.

When was the Austin 10 produced?

The available source data describes production as 1932–1947290,000 made.

How much does the Austin 10 weigh?

The available source data lists a kerb/curb weight of 15+1/2 -Lcwt lb kg 0. Actual weight can vary with engine, trim and equipment.

What class of car is the Austin 10?

The Austin 10 is listed in the sedan class.

Which markets or countries sold the Austin 10?

The CarCareTool catalog currently associates the Austin 10 with NL, NZ. Market availability and specifications can differ.

What came after the Austin 10?

The available vehicle data lists Austin A40 as a successor where applicable.

What replaced the Austin 10?

The available vehicle data lists Austin A40 as the successor where applicable.

How often should I check the tire pressure on the Austin 10?

Check the tires regularly and before long trips, with the tires cold. Use the vehicle placard or owner’s manual as the source of the manufacturer’s recommended pressure.

Should I use the tire sidewall pressure for the Austin 10?

No. The maximum pressure printed on the tire sidewall is not automatically the vehicle’s recommended setting. Use the vehicle placard or owner’s manual for the correct cold inflation pressure.

Does the recommended tire pressure change when the Austin 10 is fully loaded?

It can. Many vehicles specify a different cold pressure for heavier loads. Check the vehicle placard or owner’s manual for the exact loading condition.

Can the Austin 10 have different tire pressures front and rear?

Yes. Some vehicles specify different front and rear pressures because axle loads and vehicle configurations differ. Follow the exact vehicle recommendation where available.

Why can mileage differ from the published figure for the Austin 10?

Published fuel economy is measured under a defined test method. Real-world mileage can vary with traffic, speed, temperature, tire pressure, payload, maintenance and driving style.

Data sources and verification are available in the page editor; exact specifications can vary by year, market, trim and engine.

Austin 10 images

Vehicle images are shown from the stored source image records when available.